Product Center
Micro motor power plug 4+2P
| Item No | 6353A-06S-A0-N00 |
| Type | servo motor encoder |
| Order of units | 4+2Pin |
| Interval | 5.0mm |
| Rated current | Power supply terminal:7.0A Dog point:1.0A |
| Rated voltage | Power supply terminal:200AC Dog point:100AC |
| Installation method | Wiring type |
Overview
Engineering Data
Product Certification
Engineering Drawing
Download
Servo waterproof plug
The servo waterproof plug connector is a type of connector with high reliability and high protection level. It is mainly used in industrial machinery and equipment, especially in situations involving harsh environments such as liquids, gases, and dust. This connector has the characteristics of convenient insertion and removal, stable signal transmission, and good sealing performance, which can ensure the long-term stable operation of the equipment and avoid equipment failures caused by connector failure.
Underlying parameter
| Item No | 6353A-06S-A0-N00 |
| Type | Servo waterproof plug |
| Order of units | 4+2Pin |
| Interval | 5.0mm |
| Wiring gauge | Power supply end AWG # 18~# 20/brake end AWG # 24~# 22 |
| Type | base |
Engineering parameters
| Rated Current | 7.0A/40V | AMP |
| Contact Resistance | 25 | mΩ Max |
| Withstand Voltage | 200 | AC / DC |
| Insulation Resistance | 1500 | mΩ Min |
| Operating Temperature | -40 to 105 | ° C |
| Contact Material | Phosphor Bronze | |
| Contact Plating | Gold | |
| Insulator Material | Polyester(UL94-0) | |
| Housing | LCP | |
| Max. Processing Temp. | 260℃ for 30-60 seconds;260℃ for 10 seconds |
